rus
Column of Minpromtorg
Industry News
Exhibitions, conferences, events
M. G. Kovalsky, P. V. Panfilov
90th Anniversary of NIIzmerenie, JSC DOI: 10.22184/2499-9407.2025.39.2.26.28
90th Anniversary of NIIzmerenie, JSC DOI: 10.22184/2499-9407.2025.39.2.26.28
In RAS They Discussed System Improvement of Ensuring the of Measurements Uniformity
DOI: 10.22184/2499-9407.2025.39.2.30.31
Problems and Solutions
Г. V. Samodurov, D. V. Lakhtyukhov
Russian Machine-tool Industry in 2024: Figures and Facts DOI: 10.22184/2499-9407.2025.39.2.40.50
The paper analyses the main economic indicators and development trends of the Russian machine-tool industry on the basis of statistical information collected and processed by the Association of manufacturers of machine-tool products "Stankoinstrument".
Russian Machine-tool Industry in 2024: Figures and Facts DOI: 10.22184/2499-9407.2025.39.2.40.50
The paper analyses the main economic indicators and development trends of the Russian machine-tool industry on the basis of statistical information collected and processed by the Association of manufacturers of machine-tool products "Stankoinstrument".
Tags: импорт и потребление металлообрабатывающих станков и кпо производство станкоинструментальная отрасль экономические показатели экспорт
A. P. Kuznetsov, O. S. Sukharev
The Level of Technological Independence Achieved: Problems and solutions DOI: 10.22184/2499-9407.2025.39.2.52.64
The paper critically examines the assessing methodology for achieved level of technological independence, summarises its main shortcomings and proposes a variant to overcome them. The theory of measurement and technological development, the author's approaches in the field of "economy of technology" as a new scientific direction, including typification, accounting and measurement of technological potential and sovereignty are used as a methodology. We propose an algorithm that significantly modifies the approved methodology of the Ministry of Industry and Trade of the Russian Federation and improves it in terms of increasing the plausibility of assessing technological independence (sovereignty).
The Level of Technological Independence Achieved: Problems and solutions DOI: 10.22184/2499-9407.2025.39.2.52.64
The paper critically examines the assessing methodology for achieved level of technological independence, summarises its main shortcomings and proposes a variant to overcome them. The theory of measurement and technological development, the author's approaches in the field of "economy of technology" as a new scientific direction, including typification, accounting and measurement of technological potential and sovereignty are used as a methodology. We propose an algorithm that significantly modifies the approved methodology of the Ministry of Industry and Trade of the Russian Federation and improves it in terms of increasing the plausibility of assessing technological independence (sovereignty).
Tags: economic indicators export import and consumption of metalworking machine-tools and wtp law on technological policy level of technological independence machine-tool industry methodology for assessing technological sovereignty production technology technology readiness level закон о технологической политике методика оценки технологического суверенитета технологии уровень готовности технологий уровень технологической независимости
Materials Machine Tools
A. M. Lazar
New Multifunctional Hydraulic Press for Pneumothermal Moulding and Isothermal Forging DOI: 10.22184/2499-9407.2025.39.2.14.16
Hydraulic press with CNC for pneumothermal forming and isothermal stamping DA400.03 designed by SO "Pressmash" is presented. It is intended for producing parts from titanium and aluminium in superplasticity mode. The original design of the prefabricated thermal chamber allowing to increase the energy efficiency of the machining process is also described.
New Multifunctional Hydraulic Press for Pneumothermal Moulding and Isothermal Forging DOI: 10.22184/2499-9407.2025.39.2.14.16
Hydraulic press with CNC for pneumothermal forming and isothermal stamping DA400.03 designed by SO "Pressmash" is presented. It is intended for producing parts from titanium and aluminium in superplasticity mode. The original design of the prefabricated thermal chamber allowing to increase the energy efficiency of the machining process is also described.
Tags: hydraulic press isothermal stamping pneumothermal forming processing of titanium and aluminium superplasticity гидравлический пресс изотермическая штамповка обработка титана и алюминия пневмотермическая формовка сверхпластичность
Information Technologies
S. A. Churanov, A. A. Tumanov, M. A. Kandlin
How to Ensure Reliable Operation of Metalworking Machine Tool Spindles and Reduce Their Maintenance and Repair Costs DOI: 10.22184/2499-9407.2025.39.2.76.82
The questions of spindle service life extension, constant monitoring of working conditions and technical condition of machine tool spindles and their protection, technical diagnostics of machine tool spindles and predictive analysis of their operation using AI methods are considered. The use of a stationary spindle monitoring system "Dispatcher VM1" of domestic development is proposed.
How to Ensure Reliable Operation of Metalworking Machine Tool Spindles and Reduce Their Maintenance and Repair Costs DOI: 10.22184/2499-9407.2025.39.2.76.82
The questions of spindle service life extension, constant monitoring of working conditions and technical condition of machine tool spindles and their protection, technical diagnostics of machine tool spindles and predictive analysis of their operation using AI methods are considered. The use of a stationary spindle monitoring system "Dispatcher VM1" of domestic development is proposed.
Tags: predictive analysis spindle unit system of monitoring of working conditions and technical conditi technical diagnostics предиктивный анализ система мониторинга условий работы и технического состояния шпин техническая диагностика шпиндельный узел
Tools and Tool Systems
L. D. Malkova, I. A. Pavlyuchenkov
Application of Neural Network for Diagnosing the Condition of End Milling Cutters DOI: 10.22184/2499-9407.2025.39.2.66.69
The technique of continuous control of cutting tool condition by cutting sound using artificial intelligence is developed. Diagnostics of the state of carbide end milling cutters with the help of neural network by means of recording and processing of audio signal accompanying the process of milling with new and worn tools is carried out.
Application of Neural Network for Diagnosing the Condition of End Milling Cutters DOI: 10.22184/2499-9407.2025.39.2.66.69
The technique of continuous control of cutting tool condition by cutting sound using artificial intelligence is developed. Diagnostics of the state of carbide end milling cutters with the help of neural network by means of recording and processing of audio signal accompanying the process of milling with new and worn tools is carried out.
Tags: diagnostics end milling cutter milling neural network диагностирование концевая фреза нейросеть фрезерование
V. A. Kuznetsov, A. A. Kostryukov
Experimental Results of the Application of Eristic Synthesis to Create a Promising Instrument DOI: 10.22184/2499-9407.2025.39.2.70.75
The application of the heuristic synthesis algorithm is considered on the example of the problem of adhesive setting during reduction. The steps of its application in comprehensive reduction are consistently shown and described. The results obtained during experimental studies are presented, technical recommendations are given, implemented on the example of manufacturing a shaped mandrel.
Experimental Results of the Application of Eristic Synthesis to Create a Promising Instrument DOI: 10.22184/2499-9407.2025.39.2.70.75
The application of the heuristic synthesis algorithm is considered on the example of the problem of adhesive setting during reduction. The steps of its application in comprehensive reduction are consistently shown and described. The results obtained during experimental studies are presented, technical recommendations are given, implemented on the example of manufacturing a shaped mandrel.
Tags: encompassing reduction heuristic synthesis metal-coating lubricant regular microrelief металлоплакирующая смазка охватывающее редуцирование регулярный микрорельеф эвристический синтез
Measuring Equipment
Companies are looking for import substitution opportunities. And we are helping them
DOI: 10.22184/2499-9407.2025.39.2.90.93
Alexey Matveev, Head of the Measuring Technologies Department at PLM Ural Group of Companies, talks about peculiarities of working with Chinese coordinate measuring machines, sanctions and fashion for reverse engineering.
Alexey Matveev, Head of the Measuring Technologies Department at PLM Ural Group of Companies, talks about peculiarities of working with Chinese coordinate measuring machines, sanctions and fashion for reverse engineering.
CASE STORY
Standardization and Certification
D. E. Mironov, B. M. Pozdneev, S. A. Sevnitsky, E. V. Babenko, V. S. Churanov
Prospects of innovative development and digital transformation of the machine-tool industry on the basis of advanced standardisation, providing accelerated development and manufacture of high-tech and competitive products for fabrication of digital produc DOI: 10.22184/2499-9407.2025.39.2.84.88
Digital Transformation of Machine Tool Industry in the Aspect of Advanced Standardisation Development
Prospects of innovative development and digital transformation of the machine-tool industry on the basis of advanced standardisation, providing accelerated development and manufacture of high-tech and competitive products for fabrication of digital produc DOI: 10.22184/2499-9407.2025.39.2.84.88
Digital Transformation of Machine Tool Industry in the Aspect of Advanced Standardisation Development
Tags: высокотехнологичное оборудование интеграция систем управления мониторинг технологического оборудования опережающая стандартизация цифровая промышленность цифровая станкоинструментальная промышленность
Looking Back
Sedoy Urals forges victory
DOI: 10.22184/2499-9407.2025.39.2.94.95