rus
Topical interview
Is Foresight a Productive Technology for Anticipating the Directions of Future Science and Technology Development?
Interview with Doctor of Economics, Professor Vladimir Petrovich Tretyak
DOI: 10.22184/2499-9407.2025.41.4.32.38
DOI: 10.22184/2499-9407.2025.41.4.32.38
Adress to readers
Column of Minpromtorg
We are 10 years old
M. Kiselev, S. Novikov
„Industry 4.0“: Some Problematic Issues The systemic problems of implementing the „Industry 4.0“ concept, as well as managing information and telecommunications networks that integrate production facilities, are discussed. It is suggested that the technical implementation of the „Industry 4.0“ concept is most effective when using neural networks.
Keywords: Internet of Things, Industry 4.0, neural networks, technosphere, neurointellectualization, neurodiagnostics
„Industry 4.0“: Some Problematic Issues The systemic problems of implementing the „Industry 4.0“ concept, as well as managing information and telecommunications networks that integrate production facilities, are discussed. It is suggested that the technical implementation of the „Industry 4.0“ concept is most effective when using neural networks.
Keywords: Internet of Things, Industry 4.0, neural networks, technosphere, neurointellectualization, neurodiagnostics
Industry News
Materials processing technologies
G. A. Kazakevich, M. G. Krukovich, R. E. Rygin, A. A. Kulkov, D. N. Lytkin
Combined Method for Processing Rolling Stock Parts DOI: 10.22184/2499-9407.2025.41.4.40.42
A combined method for processing rolling stock parts is proposed, which consists of combining the process of restoring worn surfaces with subsequent hardening through boriding from coatings with high-frequency heating. Boriding provides the required hardness and wear resistance and eliminates structural defects of the deposited metal and substrate. At the same time, conditions for maintainability during repeated restoration and hardening are created.
Keywords: combined method, restoration, overlay welding, defects, boriding, composite structure, maintainability
Combined Method for Processing Rolling Stock Parts DOI: 10.22184/2499-9407.2025.41.4.40.42
A combined method for processing rolling stock parts is proposed, which consists of combining the process of restoring worn surfaces with subsequent hardening through boriding from coatings with high-frequency heating. Boriding provides the required hardness and wear resistance and eliminates structural defects of the deposited metal and substrate. At the same time, conditions for maintainability during repeated restoration and hardening are created.
Keywords: combined method, restoration, overlay welding, defects, boriding, composite structure, maintainability
Tools and Tool Systems
I. V. Ivanina
Influence of Setting Size Control Errors of Thread-cutting Heads with Round Radial Combs on Cutting Conditions DOI: 10.22184/2499-9407.2025.41.4.44.49
Theoretical studies have been conducted on influence of recommended setting sizes of thread-cutting heads equipped with round radial combs, and the errors in their control, on the pattern of changes in the rake angle and bearing surfaces of the threaded pair, taking into account the kinematic features of cutting and the arrangement of forming elements on the cutting part of the tool. Values of the setting sizes of the thread-cutting head have been obtained that ensure the required rake angles on the elementary cutting profiles of the working part of the tool. The parameters of the thread being cut have been determined under which the possibility of using special means of excess size control, applied in industry, is limited. It has been shown that to ensure the cutting and calibrating part of the tool can perform its functions, selection or design of means for controlling the amount of excess must be carried out taking into account the analytically derived relationship between the structural and geometric parameters of the threaded pair a comb and a workpiece.
Keywords: thread cutting, thread cutting head with round combs, setup dimension control, control error, back angle, support surfaces
Influence of Setting Size Control Errors of Thread-cutting Heads with Round Radial Combs on Cutting Conditions DOI: 10.22184/2499-9407.2025.41.4.44.49
Theoretical studies have been conducted on influence of recommended setting sizes of thread-cutting heads equipped with round radial combs, and the errors in their control, on the pattern of changes in the rake angle and bearing surfaces of the threaded pair, taking into account the kinematic features of cutting and the arrangement of forming elements on the cutting part of the tool. Values of the setting sizes of the thread-cutting head have been obtained that ensure the required rake angles on the elementary cutting profiles of the working part of the tool. The parameters of the thread being cut have been determined under which the possibility of using special means of excess size control, applied in industry, is limited. It has been shown that to ensure the cutting and calibrating part of the tool can perform its functions, selection or design of means for controlling the amount of excess must be carried out taking into account the analytically derived relationship between the structural and geometric parameters of the threaded pair a comb and a workpiece.
Keywords: thread cutting, thread cutting head with round combs, setup dimension control, control error, back angle, support surfaces
Measuring Equipment
Guarantee Instead of Risk: How to Choose CMI in 2025 and Not Regret It
Interview with Alexey Matveev, Head of Measurement Technologies at PLM Ural Group
DOI: 10.22184/2499-9407.2025.41.4.58.60
DOI: 10.22184/2499-9407.2025.41.4.58.60
V. I. Pronyakin, A. S. Komshin
New Approaches to Obtaining Information on the Operation of Machines and Mechanisms DOI: 10.22184/2499-9407.2025.41.4.62.73
A fundamentally new method and new possibilities for obtaining information on operation of cyclic machines and mechanisms are presented. The results of applying the method are shown for various machines and mechanisms.
Keywords: cyclic mechanisms, phasechronometric method, research, diagnostics, experimental results
New Approaches to Obtaining Information on the Operation of Machines and Mechanisms DOI: 10.22184/2499-9407.2025.41.4.62.73
A fundamentally new method and new possibilities for obtaining information on operation of cyclic machines and mechanisms are presented. The results of applying the method are shown for various machines and mechanisms.
Keywords: cyclic mechanisms, phasechronometric method, research, diagnostics, experimental results
CASE STORY
Standardization and Certification
S. A. Sevnitsky, D. S. Shutkova, I. A. Shchipakov, E. V. Safin
On Standardization in the Field of Machine Tool Industry DOI: 10.22184/2499-9407.2025.41.4.50.56
This paper presents the work of the Technical Committee for Standardization „Machine Tools“ (TC 070) in the field of standardization of metalcutting and woodworking machines, machining centers, and numerical control (NC) machines.
Keywords: standardization, technological sovereignty, innovative technologies, digital transformation of industrial production, digital machine tool industry
On Standardization in the Field of Machine Tool Industry DOI: 10.22184/2499-9407.2025.41.4.50.56
This paper presents the work of the Technical Committee for Standardization „Machine Tools“ (TC 070) in the field of standardization of metalcutting and woodworking machines, machining centers, and numerical control (NC) machines.
Keywords: standardization, technological sovereignty, innovative technologies, digital transformation of industrial production, digital machine tool industry
Looking Back
I. L. Yermolov
Academician I. I. Artobolevsky – Foreseeing the Future. On the 120th Anniversary of His Birth Academician I. I. Artobolevsky – Foreseeing the Future. On the 120th Anniversary of His Birth
Academician I. I. Artobolevsky – Foreseeing the Future. On the 120th Anniversary of His Birth Academician I. I. Artobolevsky – Foreseeing the Future. On the 120th Anniversary of His Birth
Annual Issue