rus
Issue #4/2025
G. A. Kazakevich, M. G. Krukovich, R. E. Rygin, A. A. Kulkov, D. N. Lytkin
Combined Method for Processing Rolling Stock Parts
Combined Method for Processing Rolling Stock Parts
DOI: 10.22184/2499-9407.2025.41.4.40.42
A combined method for processing rolling stock parts is proposed, which consists of combining the process of restoring worn surfaces with subsequent hardening through boriding from coatings with high-frequency heating. Boriding provides the required hardness and wear resistance and eliminates structural defects of the deposited metal and substrate. At the same time, conditions for maintainability during repeated restoration and hardening are created.
Keywords: combined method, restoration, overlay welding, defects, boriding, composite structure, maintainability
Subscribe to the journal Stankoinstrument to read the full article.
A combined method for processing rolling stock parts is proposed, which consists of combining the process of restoring worn surfaces with subsequent hardening through boriding from coatings with high-frequency heating. Boriding provides the required hardness and wear resistance and eliminates structural defects of the deposited metal and substrate. At the same time, conditions for maintainability during repeated restoration and hardening are created.
Keywords: combined method, restoration, overlay welding, defects, boriding, composite structure, maintainability
Subscribe to the journal Stankoinstrument to read the full article.
Readers feedback
